Spring Machine
Forming Machine

RX series
MX-20B
MX series
RM-20
MS-20
MCS-10
MCS-20
RS-8
AX series
MCS series
SX series
MF-10B
FX series

Coiling Machine
PCX-30
PCX series
PC-8A
PC-4
CX series
CX-2A
CS-8
CK-8

discontinued
SCD-7
MCS-G series
MCX series
PC/PC-H Series
SCD-5


The AX Computer Controlled Spring Making Machine
with low cost and high performance makes its debut.


AX Series

Computer Controlled Spring Making Machine





AX-20A Computer Controlled Spring Making Machine
AX-20A

New Features
  • You can customize AX as you wish with numerous optional accessories.
  • AX has 8 sets of Slide Base which can be located at any angle around the circular forming table in order to gain maximum forming capability.
  • The machine is equipped with Feed, Cam and Rotary Wire Guide axes as standard.
  • 3 optional Servo Spinner Units and 2 optional Servo Linear Units can be easily added to make the AX an 8 axes machine.









Note: The above is with optional accessories.



Cam Shaft and Slide Base
  • Eight cam shaft drive the forming slide whith can be located at any angle around the circular forming table. (patent pending)
  • 8 sets of Cam Shaft and Slide Base are standard equipment.
  • Cam for AX is exclusive. Single Cam and Twin Cam are available.
  • The slide layout can be changed simply by altering the mounting position on the slide base for tool holders and servo drive unit. (Cut holder, Tool holder A and B, U Attachment holder (1pc. of each) are equipped as standard.)
  • AX-20: Maximum slide stroke is 67mm. This AX-20 machine provides wide space around the wire guide enhancing forming capability.



Rotary Wire Guide
  • Rotary Wire Guide is equipped as standard.
  • Forming capability is enhanced substantially by Rotary Wire Guide in comparison will Quill.
  • Rotary Wire Guide has higher rigdity than Quill. Separation of Rotary Wire Guide into two parts prevents jamming of wire and provides access to the easy maintenance.
  • AX-20: Wire Guide is common to that used on the MX-20 and the distance between the surface of circular table and top of Rotary Wire Guide is 90mm. this means easy forming for long leg springs.



Servo Unit
  • Servo Spinner Unit and Servo Linear Unit are available as optional equipment for complex operations.



Double Action Mechanism
  • Retractable Lever and Twin Cam are available for high-speed production. (1 set of Retractable Lever and Twin Cam for Cut axis are equipped as standard.)



Computer
  • Computer unit is separated from the machine body.
  • AX's computer adopted the latest Pentium Processor and Linux Operating System.
  • The computer display is TFT color liquid crystal display.
  • A mouse and keyboard are supplied as standard accessory of computer.
  • The computer mouse assists you in making and editing programs.
  • 3.5 inch floppy disk drive is equipped as standard memory device.
  • The program is saved simultaneously as back-up data in the computer when it is saved on 3.5 inch floppy disk.



Common Tools
  • AX-20: The wire line tools - Feedrolls, Wire Guide and Guide Liner are common to those used on the MX-20 and RX-20.
  • AX-20: Cut tool and Spinner tools are exclusive for AX-20.
  • AX-20: Other wire forming tools are common to those used on the MCX-20.


Optional Accessories
Slide Base & Cam Shaft
(8sets standard)
Tool Holder A
(1sets standard)
Tool Holder B
(1sets standard)

U Attachment Holder
(1sets standard)
Retractable Lever & Twin Cam
(1sets standard)
Body Swing Holder

Spinner HeadSwing Spinner HeadServo Spinner Unit

Servo Linear Unit









Specifications
Machine Specifications

AX-3 AX-10A AX-20A
Wire Diameter
0.05-0.3mm0.2-1.0mm0.5-2.0mm
Feed Min. Increment 0.01mm 0.02mm 0.02mm
Moter Rated Output200W 1000W 2600W
Cam Axis Min. Increment 0.05 0.05 0.05
Moter Rated Output200W 1000W 2600W
Rotary Wire Guide Min. Increment 0.1Degree 0.1Degree0.1Degree
Moter Rated Output100W 100W 750W
Pneumatic Solenoid Valve
4pcs. 4pcs. 4pcs.
Peripheral Device Control
12ports 12ports 12ports
Power Requirement 3 Phase 5A 20A 20A
Machine Dimensions Height 1510mm 1660mm 1880mm
Width 670mm 810mm 1080mm
Depth 555mm 860mm 1220mm
Weight 400kg 560kg 1100kg
Computer Dimentions Height 1600mm 1600mm 1600mm
Width 540mm 540mm 540mm
Depth 540mm 540mm 540mm
Weight 210kg 210kg 210kg
Installation Area Width 1825mm 1825mm 1825mm
Depth 2500mm 2500mm 2500mm

Optional Servo

AX-3 AX-10A AX-20A
Spinner Min. Increment 0.001 0.001 0.001
Moter Rated Output 30W 100W 400W
Linear Min. Increment 0.001mm 0.01mm 0.01mm
Moter Rated Output 100W 200W 400W

Computer Specifications
CPU Pentium Processor
Program 2000 Steps
Program Storage USB flash memory & 3.5 inch FDD
Display 15 inch TFT Color LC Display
Operating Temp 0 - 45 degree



"Linux" is a registered trademark of Linus Torvalds of U.S.A. in U.S.A and other countries.
Please note the contents of this web page is subject to change without notice.


Download of the catalogue ax.pdf(1.47MB)
* Abobe Reader is neceeary for reference.