Spring Machine
Forming Machine

RX series
MX-20B
MX series
RM-20
MS-20
MCS-10
MCS-20
RS-8
AX series
MCS series
SX series
MF-10B
FX series

Coiling Machine
PCX-30
PCX series
PC-8A
PC-4
CX series
CX-2A
CS-8
CK-8

discontinued
SCD-7
MCS-G series
MCX series
PC/PC-H Series
SCD-5


MX series had expanded its line up
with new additional machines!


MX series

Computer Controlled Spring Forming Machine



MX-30 Spring Forming Machine
MX-30

Once you have installed tools, all you have to do is programming, thus minimum set-up time and maximum production speed is achieved, resulting cost effective production.
The Body Slide is equipped with the Outside Diameter Axis, enabling to control the position of Body Tool, three dimensionally.




Features
  • Body Slide is equipped with the Outside Diameter Axis, enabling to control the position of Body Tool, three dimensionally.
  • Servo Swing Mechanism numerically controls the lateral (right / left) position of all slides, thus the initial tension of the spring body or the offset position of the Spinner is easily adjusted.
  • Rotary Wire Feed and Rotary Wire Guide mechanism provides for easy complex forming without changing the position of the slides.
  • Other than the body slides, all tool slides are driven by an independent servo motor, via crank mechanism, resulting in high-speed precision operation.
  • Rack & Pinion driving mechanism (optional) is available and applicable for the all linear motion Slides. This mechanism enables to control in and out position of the Spinner, Pitch tool, etc., at uniform velocity.
  • The Image sensor (optional) feature can be equipped on the latest computer.
  • MX-40A : Dual Action Spinner is standard equipment. This can rotates the Arbor as well as the Spinner Tool.iMX-20A / MX-30 optionalj





Specification
Machine Specification

MX-8 MX-10 MX-20A MX-30 MX-40A
Forming Capability Wire Dia. 0.2-0.8mm0.2-1.0mm0.5-2.0mm1.5-3.0mm1.5-4.0mm
Peripheral Device Control
12ports 12ports 12ports 12ports 12ports
Power Requirement 3 Phase 20A 20A 30A 50A 50A
Machine Dimensions Height 1650mm 1530mm 2080mm 2010mm 2240mm
Width 950mm 800mm 1080mm 1500mm 1940mm
Depth 970mm 870mm 1280mm 1590mm 1910mm
Net Weight 820kg
1360kg 2200kg 3300kg
Computer Dimensions Height 1600mm 1600mm 1600mm 1600mm 1600mm
Width 540mm 410mm 540mm 410mm 540mm
Depth 540mm 410mm 540mm 4100mm 540mm
Net Weight210kg 220kg 210kg 220kg 210kg

Feature for Servo Motor

MX-8 MX-10 MX-20A MX-30 MX-40A
Feed Min. Increment 0.01mm 0.02mm 0.02mm 0.01mm 0.02mm
Max. Speed 70m/min 112m/min 82m/min 73m/min 60m/min
Rotary Wire Feed Min. Increment 0.1deg. 0.1‹ 0.1deg. 0.01‹ 0.1deg.
Rotary Wire Guide Min. Increment 0.1deg. 0.1‹ 0.1deg. 0.01‹ 0.1deg.
Swing Min. Increment 0.002mm 0.01mm 0.01mm 0.001mm 0.01mm
Stroke +/- 5.5mm+/- 5.8mm+/- 8mm +/- 12mm +/- 15mm
Body Tool Slide
(Rack & Pinion)
Min. Increment 0.01mm 0.001mm 0.01mm 0.001mm 0.01mm
Stroke 42mm 43mm 105mm 120mm 120mm
Tool Slide
(Crank)
Min. Increment 0.01deg. 0.01‹ 0.01deg. 0.01‹ 0.01deg.
Stroke 40mm 40mm 100mm 120mm 120mm
Diameter Min. Increment 0.001 0.001 0.01 0.001 0.001
Stroke 8mm 10mm 17.6mm 25mm 26mm
Spinner Min. Increment 0.001 0.001 0.001 0.0001 0.001
Spinner Arbor Min. Increment

0.001
(optional)
0.0001
(optional)
0.001

"Linux" is a registered trademark of Linus Torvalds of U.S.A. in U.S.A and other countries.
Please note the contents of this web page is subject to change without notice.


Download of the catalogue mx.pdf(3.59MB)
* Abobe Reader is neceeary for reference.