Spring Machine
Forming Machine

RX series
MX-20B
MX series
RM-20
MS-20
MCS-10
MCS-20
RS-8
AX series
MCS series
SX series
MF-10B
FX series

Coiling Machine
PCX-30
PCX series
PC-8A
PC-4
CX series
CX-2A
CS-8
CK-8

discontinued
SCD-7
MCS-G series
MCX series
PC/PC-H Series
SCD-5


The PC-4 is Simple and Precise 1 Point Pin Coiling Machine.

PC-4

Computer Controlled Coiling Machine



PC-4 Computer Controlled Coiling Machine
PC-4



Features
  • The PC-4 is simple 1 Point Pin Coiling Machine.
  • Optimized wire guide and tools allows for precise coiling of small wire.
  • Adopting the crank system on the cut slide increases output.
  • Unifying the computer and machine allows for small space. The PC-4 is the best machine for substitute for mechanical machine.
  • Static capacity sensor is equipped as standard accessory for controlling the free length.
  • The standard 4 axes equipped are: Feed Axis, Cut Axis, Push Pitch Axis, and Diameter Axis.
  • The Image sensor (optional) can control the measurement of products and Wireless LAN (optional) can manage the machine status.





Specifications
Machine Specifications

PC-4
Forming Capability Wire Dia. 0.1-0.4mm
D/d 4
Peripheral Device Control
12ports
Power Requirements 3 Phase 10A
Machine Dimensions Height 2140mm
Width 1200mm
Depth 820mm
Weight
Computer Dimensions Height 1600mm
Width 410mm
Depth 410mm
Weight 220kg


Feature for Servo Motor

PC-4
Feed Min. Increment 0.01mm
Cut Slide Min. Increment 0.01
Push Pitch Min. Increment 0.001
Diameter Min. Increment 0.001

"Linux" is a registered trademark of Linus Torvalds of U.S.A. in U.S.A and other countries.
Please note the contents of this web page is subject to change without notice.


Download of the catalogue pc4.pdf(3.23MB)
* Abobe Reader is neceeary for reference.