Spring Machine
Forming Machine

RX series
MX-20B
MX series
RM-20
MS-20
MCS-10
MCS-20
RS-8
AX series
MCS series
SX series
MF-10B
FX series

Coiling Machine
PCX-30
PCX series
PC-8A
PC-4
CX series
CX-2A
CS-8
CK-8

discontinued
SCD-7
MCS-G series
MCX series
PC/PC-H Series
SCD-5


The PCX - the best machine for the compression
springs - takes another step forward.
Servo mechanism and computer system are optimized and
PCX achieves easy operation and high speed production.


PCX series

Computer Controlled Coiling Machine



PCX-20A Computer Controlled Coiling Machine
PCX-20A



Features
  • Servo structure and computer system are optimized to achieve better usability and faster production speed.
  • Upper and lower coiling pins are controlled by 4 sets of servo motors and each of them can be independently controlled in X - Y direction.
  • The PCX-40A can change the coiling setup instantly from right hand coiling to left hand coiling, 1 point pin to 2 point pin by changing the program. Fine adjustment of coiling pointfs position can be done by program.
  • Since cut slide, arbor, wedge pitch slide are equipped on the center base being controlled by servo motor up and down, it is not necessary to change the position of arbor and cut tool even if the spring diameter is changed.
  • The PCX-40A is also equipped with PCX coiler features such as free length control, outside diameter control by static capacitor sensor and program generator, etc.
  • The Image sensor (optional) feature can be equipped on the latest computer.
  • 2 point initial tension unit (optional) can be mounted on PCX-20A and PCX-40A.





Specifications
Machine Specifications

PCX-20A PCX-40A
Forming Capability Wire Dia. 0.5-2.0mm 1.5-4.0mm
D/d 4 4
Outside Diameter50mm max. 70mm max.
Peripheral Device Control
12ports 12ports
Power Requirements 3 Phase 20A 50A
Machine Dimensions Height 1824mm 2067mm
Width 1346mm 1963mm
Depth 826mm 1563mm
Weight 935kg 3100kg
Computer Dimensions Height 1600mm 1600mm
Width 540mm 540mm
Depth 540mm 540mm
Weight 210kg 210kg

Feature for Servo Motor

PCX-20A PCX-40A
Feed Min. Increment 0.01mm 0.05mm
Max. Speed 105m/min.110m/min.
Cut Slide Min. Increment 0.01 0.01
Wedge Pitch Slide Min. Increment 0.01 0.01
Push Pitch Min. Increment 0.01 0.01
Point Horizontal Min. Increment 0.001 0.01
Point Vertical Min. Increment 0.001 0.01
Center Base Min. Increment 0.01 0.01
Arbor Retraction Min. Increment 0.01

"Linux" is a registered trademark of Linus Torvalds of U.S.A. in U.S.A and other countries.
Please note the contents of this web page is subject to change without notice.


Download of the catalogue pcx.pdf(524KB)
* Abobe Reader is neceeary for reference.